U-Select-It Financing Available - Apply Now!
Search 

Configure Your Machine
    1-800-247-8709

U-Select-It Career Opportunities

PRODUCTION WORKERS
Fawn Manufacturing

Fawn Manufacturing is looking for production workers to start immediately.
Manufacturing experience a plus, but not required. We are looking to fill the following positions:

  • Forklift (2nd Shift)
  • Assembly (2nd shift)
  • Press Operator (2nd shift)

Requirements:
Must be able to lift up to 50 – 75 lbs., physically able to stand for up to (8) hours, do bending, twisting, grasping, and have the ability to grip sheet metal, pick/pack or assemble parts. Must be punctual and have a good attendance record. Education: high school or equivalent.

2nd shift positions available: 1st shift (4:00pm - 12:30am). Pay increase and benefits after passing probationary period (120 days). Equal Opportunity Employer

Apply in person - Human Resources Department
Applications Accepted: 9 a.m. - 11 a.m. and 1 p.m. - 4 p.m. Monday through Friday


The Wittern Group / Fawn Manufacturing
8040 University Blvd
Clive, Iowa 50325
(NE Corner Door- Human Resources)


No Phone Calls Please

Post Offer Physical and Drug Screen Required

Engineer Internship - Summer 2018
The Wittern Group, the world’s largest manufacturer of automated dispensing equipment for the food service, medical, MRO and PPE markets, has an immediate opening for a Engineer Intern. This internship will be responsible for:

Perform testing of new vending machine embedded electronic control systems hardware, software and communications protocols and document results.

Assist in building prototype electrical/electronic modules, wire harnesses, test equipment and vending machines.

Assist in the development of test plans and procedures in conjunction with an Engineer.

Assist Engineer in investigation of electrical and electronic hardware/ software issues and determination of root cause problem and implementation of corrective action.

Provide support to manufacturing, service and production personnel as needed.

Assist in the investigation and development of potential automated tests using PC hardware, software and wireless interfaces.

Qualifications:

Minimum of 2 years engineering, computer science or technical school experience, with emphasis or interest in electronics, embedded hardware, software and communications protocols.

“Hands on” type of person for work in a product development and testing environment.

Ability to work as a motivated “self-starter”, to work independently and complete work tasks.

Ability to use Microsoft Office suite software in a Microsoft Windows environment.

Familiarity with basic electrical and electronic test equipment, such as oscilloscopes and handheld digital voltage meters.

Any of the following items are desirable, however, not required:

Embedded 8 or 16 bit microprocessor electronics and software experience using assembler or C/C++ programming language.

Windows PC programming experience.

Smart Phone app development

Windows Serial and USB communications settings and interface.

Windows network communications implementation, setup and utilities.

Familiarity with Windows /Android smart phone communication settings interfaces and utilities.

Ability to solder electronic components a plus

Effective verbal, written and interpersonal communication skills required. Knowledgeable in MS Office programs. Must be able to multi-task in a fast paced environment and be service oriented with proven professionalism and a positive attitude. We offer competitive compensation and the professional advantages of an environment that supports your development and recognizes your achievements. Post Offer Physical and Drug Testing Required.

Buyer

The Wittern Group, a leading manufacturer of vending machines and pioneer in vending management services, has an immediate opening for an experienced Buyer. This position will be responsible for sourcing, negotiating and purchasing of materials for production manufacturing. Must be able to read and interpret blueprints and have background/experience in design engineering. Duties also include maintaining records of contacts, accounts and orders and entry of orders into MRP/ERP system.

Qualified candidates must have strong negotiation, analytical and project management skills. Bilingual (Spanish) communication skills preferred. Excellent organizational, problem-solving and global sourcing abilities required. Knowledgeable in MS Office programs. Must be able to multi-task in a fast paced environment and be service oriented with proven professionalism and a positive attitude. We offer competitive compensation, outstanding benefits and the professional advantages of an environment that supports your development and recognizes your achievements. Post Offer Physical and Drug Testing Required.

Manufacturing Supervisor – Metal Assembly

The Wittern Group, a leading manufacturer of vending machines, has an immediate opening for a Manufacturing Supervisor in our Assembly department. Knowledge of Lean Manufacturing principles and tools, production control, computer systems applications and personnel management required. Prior experience in assembly line production preferred. This position is on first shift (7:30am – 4:00pm).

Qualified candidates must demonstrate effective mechanical aptitude and previous fabrication and mix model assembly line experience, along with prior experience managing a union workforce. Excellent interpersonal and communication skills. Bilingual (Spanish) communication skills preferred. Knowledgeable in MS Office programs. Must be able to multi-task in a fast paced environment and be service oriented with proven professionalism. We offer competitive compensation, outstanding benefits and the professional advantages of an environment that supports your development and recognizes your achievements. Post Offer Physical and Drug Testing Required.



Manufacturing Engineer

POSITION SUMMARY:
The Manufacturing Engineer (ME) will lead and drive continuous improvement programs utilizing Lean Six Sigma methodologies, manage labor standards, implement statistical process controls, provide leadership of key project teams working with multiple functional disciplines throughout the organization and lead daily problem solving teams to better meet customer needs.

The ME will champion development and maintenance of direct labor rate standards. The ME is also charged with enhancing the company’s position with respect to manpower, processes, equipment and tooling to keep our manufacturing techniques as current and efficient as possible to maintain our competitive position in the market.

This person is responsible for the planning, specifying, designing and implementation of manufacturing systems including manufacturing process flow planning. This person must be current with respect to engineering technologies in system integration and manufacturing systems engineering to assure that the company’s manufacturing systems produce quality products, remain cost competitive, and continually improve.

Manages projects from concept to completion including CAD designs, searching and locating suppliers, writing specifications, obtaining quotes, scheduling contractors, and managing project timelines and budgets.
Engineering works with minimal direction from the Plant Manager, who sets broad direction and goals.
Provides instructions and direction to tool and die makers, set-up technicians, and maintenance technicians in the course of projects.
Provides training and direction to junior engineers in the context of project teams and activities.

The position actively supports the new product development and launch process by providing manufacturability input, representing production needs and concerns, building prototypes and designing equipment.
The ME supports the plants and production personnel in their goals to improve safety, quality, delivery, and reduce costs and scrap.

POSITION QUALIFICATION REQUIREMENTS
Education: Bachelor’s Degree in Engineering, required.

Experience:
Minimum 3 years total experience in progressively responsible positions in the field of specialty.
Minimum 2 years experience in a manufacturing environment dealing with manufacturing projects.
Proficient designing molded parts, sheet metal parts, and assemblies.
Minimum of four years’ experience with solid modeling CAD development tools.
Experience with Solid Works, preferred.
Extensive knowledge of various types of manufacturing equipment and the limitations.
Experience working with other engineers and designers to define constraints and requirements.
Experience in LEAN environment, a plus.
Proven analytical skills.
Excellent oral and written communication skills are required Solid organizational abilities, attention to detail.
Proficient in the knowledge and use of MS Office (Word, Excel).

We offer competitive compensation, outstanding benefits and the professional advantages of an environment that supports your development and recognizes your achievements. Post Offer Physical and Drug Testing Required.

Equal Opportunity Employer
Please send letter of interest and resume to:
The Wittern Group
Human Resources - MSF
8040 University Blvd. Clive, Iowa 50325
or
email: HR@wittern.com
Please Send Resumes To:

The Wittern Group
8040 University Blvd
Clive, IA 50325
Attn: Human Resources
Fax: 515-271-8476
HR@wittern.com

We require a pre-employment physical and drug screen.
EOE
  Commitment   Contact Us   Financing   Home   Parts-Service   Promotions   Regional Contacts   Testimonials   Vending Machines   Warranty Registration
  Site Map
Free Call: 1-800-247-8709
Uselectit.com © 2018     |     Privacy Policy
Connect With Us
Linked In Google+
USelectIt, Vending Machines, Clive, IA